 |
NYSWDA's Training Calendar
|
|
|
|
|
|
|
Tuesday, December 1, 2009 |
|
|
Event Title: EPA Certified One Day Lead Renovator Training
Where: Community Action of Greene County, Inc. - Catskill
Tuesday, December 1, 2009
Time: 8:30 AM - 5:30 PM EST
|
EPA Certified One Day Lead Renovator Training
This training is for:
Weatherization subgrantees' crew supervisors and crew leaders only.
Course Description:
The US Environmental Protection Agency (EPA) published the Lead; Renovation, Repair and Painting Program that requires each job have an EPA Certified Renovator on-site while jobs are set up and cleaned up. The certified person will be responsible for documenting that all work was done in a lead safe manner.
This is a 1-day course with approximately 6 hours classroom and 2 hours hands-on lab work and will include testing at the end of the day. Anyone passing the test will then be considered an EPA Certified Renovator and receive a certification card from the training provider (ATC). This is the first step in getting your Agency Certified as a Firm and it is a requirement of your contract.
Click here for the Lead Considerations section of the PPM (specifically page 145-148).
Click here for the agenda.
Prerequisites: none
Class Size: 16 - ATC requires an 8 to 1 student to trainer ratio and a strict maximum limit of 16. Registrations should be reserved for crew chiefs crew leaders.
BPI CEU: 3.5
Instructor: ATC Associates
Course Fees: There is no cost to Weatherization agencies
|
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 2
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Tuesday, December 1, 2009
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of November 30th through December 4th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 2:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
Click here to register
|
|
Wednesday, December 2, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 3
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Wednesday, December 2, 2009
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of November 30th through December 4th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 2:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
Click here to register
|
|
Thursday, December 3, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 4
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Thursday, December 3, 2009
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of November 30th through December 4th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 2:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
Click here to register
|
|
Friday, December 4, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 5
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Friday, December 4, 2009
Time: 9:00 AM - 2:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of November 30th through December 4th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 2:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
Click here to register
|
|
Tuesday, December 8, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Snell Infrared Training for Weatherization Professionals
Where: Community Action Commission to Help the Economy, Inc. - Liberty
Tuesday, December 8, 2009
Time: 8:30 AM - 4:30 PM EST
|
Snell Infrared Training for Weatherization Professionals
Who Should Attend:
Auditors and Field Staff
Course Description:
The Snell Group is known nationally as a leader in Infrared Imaging technology. This 2-day training involves both classroom and hands on field sessions. The attendees, upon completion of the training, will have an understanding of the basic heat theory necessary for all thermal work and will know how to best utilize the imaging equipment they have and be better able to employ the equipment to perform blower door assisted weatherization practices. Comprehensive training manuals for each attendee will be issued during this training to help the trainee get the most from their imaging equipment. This training is capped at 16 attendees, so please enroll early.
Agenda:
Click here for the complete "Course Outline/Schedule" Requires attendance on December 8th and 9th / 8:00am - 5:00pm (lunch included)
Other Notes:
Attendees must bring their IR camera with charged batteries. The field sessions will be held outside regardless of the weather, so bring winter clothing, gloves and hat.
Class Size: 16
BPI CEU: 14
Instructor: Matt Schwoegler, The Snell Group
Course Fees;
$40/person (covers both days), WAP sub-grantees only, $350/person affiliate members, $500/person Private Contractors
Click here to register
|
|
Wednesday, December 9, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Snell Infrared Training for Weatherization Professionals
Where: Community Action Commission to Help the Economy, Inc. - Liberty
Wednesday, December 9, 2009
Time: 8:30 AM - 4:30 PM EST
|
Snell Infrared Training for Weatherization Professionals
Who Should Attend:
Auditors and Field Staff
Course Description:
The Snell Group is known nationally as a leader in Infrared Imaging technology. This 2-day training involves both classroom and hands on field sessions. The attendees, upon completion of the training, will have an understanding of the basic heat theory necessary for all thermal work and will know how to best utilize the imaging equipment they have and be better able to employ the equipment to perform blower door assisted weatherization practices. Comprehensive training manuals for each attendee will be issued during this training to help the trainee get the most from their imaging equipment. This training is capped at 16 attendees, so please enroll early.
Agenda:
Click here for the complete "Course Outline/Schedule" Requires attendance on December 8th and 9th / 8:00am - 5:00pm (lunch included)
Other Notes:
Attendees must bring their IR camera with charged batteries. The field sessions will be held outside regardless of the weather, so bring winter clothing, gloves and hat.
Class Size: 16
BPI CEU: 14
Instructor: Matt Schwoegler, The Snell Group
Course Fees;
$40/person (covers both days), WAP sub-grantees only, $350/person affiliate members, $500/person Private Contractors
Click here to register
|
|
Thursday, December 10, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Snell Infrared Training for Weatherization Professionals
Where: Albany County Community Action - Albany
Thursday, December 10, 2009
Time: 8:30 AM - 4:30 PM EST
|
Snell Infrared Training for Weatherization Professionals
Who Should Attend:
Auditors and Field Staff
Course Description:
The Snell Group is known nationally as a leader in Infrared Imaging technology. This 2-day training involves both classroom and hands on field sessions. The attendees, upon completion of the training, will have an understanding of the basic heat theory necessary for all thermal work and will know how to best utilize the imaging equipment they have and be better able to employ the equipment to perform blower door assisted weatherization practices. Comprehensive training manuals for each attendee will be issued during this training to help the trainee get the most from their imaging equipment. This training is capped at 16 attendees, so please enroll early.
Agenda:
Click here for the complete "Course Outline/Schedule" Requires attendance on December 10th and 11th / 8:00am - 5:00pm (lunch included)
Other Notes:
Attendees must bring their IR camera with charged batteries. The field sessions will be held outside regardless of the weather, so bring winter clothing, gloves and hat.
Class Size: 16
BPI CEU: 14
Instructor: Matt Schwoegler, The Snell Group
Course Fees;
$40/person (covers both days), WAP sub-grantees only, $350/person affiliate members, $500/person Private Contractors
Click here to register
|
|
Friday, December 11, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: Snell Infrared Training for Weatherization Professionals
Where: Albany County Community Action - Albany
Friday, December 11, 2009
Time: 8:30 AM - 4:30 PM EST
|
Snell Infrared Training for Weatherization Professionals
Who Should Attend:
Auditors and Field Staff
Course Description:
The Snell Group is known nationally as a leader in Infrared Imaging technology. This 2-day training involves both classroom and hands on field sessions. The attendees, upon completion of the training, will have an understanding of the basic heat theory necessary for all thermal work and will know how to best utilize the imaging equipment they have and be better able to employ the equipment to perform blower door assisted weatherization practices. Comprehensive training manuals for each attendee will be issued during this training to help the trainee get the most from their imaging equipment. This training is capped at 16 attendees, so please enroll early.
Agenda:
Click here for the complete "Course Outline/Schedule" Requires attendance on December 10th and 11th / 8:00am - 5:00pm (lunch included)
Other Notes:
Attendees must bring their IR camera with charged batteries. The field sessions will be held outside regardless of the weather, so bring winter clothing, gloves and hat.
Class Size: 16
BPI CEU: 14
Instructor: Matt Schwoegler, The Snell Group
Course Fees;
$40/person (covers both days), WAP sub-grantees only, $350/person affiliate members, $500/person Private Contractors
Click here to register
|
|
Tuesday, December 15, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: EPA Certified One Day Lead Renovator Training
Where: Neighborhood Housing Services of South Buffalo, Inc. - Buffalo
Tuesday, December 15, 2009
Time: 8:30 AM - 5:30 PM EST
|
EPA Certified One Day Lead Renovator Training
This training is for:
Weatherization subgrantees' crew supervisors and crew leaders only.
Course Description:
The US Environmental Protection Agency (EPA) published the Lead; Renovation, Repair and Painting Program that requires each job have an EPA Certified Renovator on-site while jobs are set up and cleaned up. The certified person will be responsible for documenting that all work was done in a lead safe manner.
This is a 1-day course with approximately 6 hours classroom and 2 hours hands-on lab work and will include testing at the end of the day. Anyone passing the test will then be considered an EPA Certified Renovator and receive a certification card from the training provider (ATC). This is the first step in getting your Agency Certified as a Firm and it is a requirement of your contract.
Click here for the Lead Considerations section of the PPM (specifically page 145-148).
Click here for the agenda.
Prerequisites: none
Class Size: 16 - ATC requires an 8 to 1 student to trainer ratio and a strict maximum limit of 16. Registrations should be reserved for crew chiefs crew leaders.
BPI CEU: 3.5
Instructor: ATC
Course Fees: There is no cost to Weatherization agencies
|
|
Wednesday, December 16, 2009 (1 2 3 4 8 9 10 11 15 16)
|
|
|
Event Title: EPA Certified One Day Lead Renovator Training
Where: Neighborhood Housing Services of South Buffalo, Inc. - Buffalo
Wednesday, December 16, 2009
Time: 8:30 AM - 5:30 PM EST
|
EPA Certified One Day Lead Renovator Training
This training is for:
Weatherization subgrantees' crew supervisors and crew leaders only.
Course Description:
The US Environmental Protection Agency (EPA) published the Lead; Renovation, Repair and Painting Program that requires each job have an EPA Certified Renovator on-site while jobs are set up and cleaned up. The certified person will be responsible for documenting that all work was done in a lead safe manner.
This is a 1-day course with approximately 6 hours classroom and 2 hours hands-on lab work and will include testing at the end of the day. Anyone passing the test will then be considered an EPA Certified Renovator and receive a certification card from the training provider (ATC). This is the first step in getting your Agency Certified as a Firm and it is a requirement of your contract.
Click here for the Lead Considerations section of the PPM (specifically page 145-148).
Click here for the agenda.
Prerequisites: none
Class Size: 16 - ATC requires an 8 to 1 student to trainer ratio and a strict maximum limit of 16. Registrations should be reserved for crew chiefs crew leaders.
BPI CEU: 3.5
Instructor: ATC
Course Fees: There is no cost to Weatherization agencies
|
|
|