 |
NYSWDA's Training Calendar
|
|
|
|
|
|
|
Monday, May 3, 2010 |
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 1
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Monday, May 3, 2010
Time: 11:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 3rd through 7th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Tuesday, May 4, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 2
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Tuesday, May 4, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 3rd through 7th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Wednesday, May 5, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 3
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Wednesday, May 5, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 3rd through 7th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Thursday, May 6, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 4
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Thursday, May 6, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 3rd through 7th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Friday, May 7, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 5
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Friday, May 7, 2010
Time: 9:00 AM - 12:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 3rd through 7th
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$100/person - Weatherization Staff and NYSWDA members
$500/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Monday, May 10, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
Event Title: EPA Certified One Day Lead Renovator Training
Where: ATC Associates - NYC
Monday, May 10, 2010
Time: 9:00 AM - 6:00 PM EST
|
EPA Certified One Day Lead Renovator Training
This training is for:
Weatherization subgrantees' crew supervisors and crew leaders only.
Course Description:
The US Environmental Protection Agency (EPA) published the Lead; Renovation, Repair and Painting Program that requires each job have an EPA Certified Renovator on-site while jobs are set up and cleaned up. The certified person will be responsible for documenting that all work was done in a lead safe manner.
This is a 1-day course with approximately 6 hours classroom and 2 hours hands-on lab work and will include testing at the end of the day. Anyone passing the test will then be considered an EPA Certified Renovator and receive a certification card from the training provider (ATC). This is the first step in getting your Agency Certified as a Firm and it is a requirement of your contract.
Click here for the Lead Considerations section of the PPM (specifically page 145-148).
Click here for the agenda.
Prerequisites: none
Class Size: 16 - ATC requires an 8 to 1 student to trainer ratio and a strict maximum limit of 16. Registrations should be reserved for crew chiefs crew leaders.
BPI CEU: 3.5
Instructor: ATC Associates, Inc.
Course Fees: There is no cost to Weatherization agencies - $150/person all non-members
Click here to register
|
|
|
Event Title: Heating Systems and Chimney Fundamentals
Where: NYSWDA Training Center - East Syracuse
Monday, May 10, 2010
Time: 9:00 AM - 4:00 PM EST
|
Heating Systems and Chimney Fundamentals
This training is for:
Entry level HVAC techs, auditors and sub-contractors
Course Description:
This is an introductory course that will teach fundamentals of heating systems and venting combustion appliances. The focus is to provide all personnel working in client homes, the knowledge to identify different classifications of furnaces and boilers. Instruction on health and safety issues for those working on venting systems and an explanation of which materials can be used and which cannot. NFPA venting guidelines will be introduced so that venting safety is built into the thought process. This training will assist technicians in identifying problems, repairing and analysis of venting systems in the field.
Agenda:
Morning session - classroom presentation
Afternoon session - consists of hands-on lab training
Prerequisites: None
Class Size: 10
BPI CEU: 3.25
Instructors: Adam Harris - NYSWDA
Course Fees:
$50/person (members), $100/person (affiliate members), $200/person
(non-members)
Click here to register
|
|
Tuesday, May 11, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: EPA Certified One Day Lead Renovator Training
Where: ATC Associates - NYC
Tuesday, May 11, 2010
Time: 9:00 AM - 6:00 PM EST
|
EPA Certified One Day Lead Renovator Training
This training is for:
Weatherization subgrantees' crew supervisors and crew leaders only.
Course Description:
The US Environmental Protection Agency (EPA) published the Lead; Renovation, Repair and Painting Program that requires each job have an EPA Certified Renovator on-site while jobs are set up and cleaned up. The certified person will be responsible for documenting that all work was done in a lead safe manner.
This is a 1-day course with approximately 6 hours classroom and 2 hours hands-on lab work and will include testing at the end of the day. Anyone passing the test will then be considered an EPA Certified Renovator and receive a certification card from the training provider (ATC). This is the first step in getting your Agency Certified as a Firm and it is a requirement of your contract.
Click here for the Lead Considerations section of the PPM (specifically page 145-148).
Click here for the agenda.
Prerequisites: none
Class Size: 16 - ATC requires an 8 to 1 student to trainer ratio and a strict maximum limit of 16. Registrations should be reserved for crew chiefs crew leaders.
BPI CEU: 3.5
Instructor: ATC Associates, Inc.
Course Fees: There is no cost to Weatherization agencies - $150/person all non-members
Click here to register
|
|
|
Event Title: Small Home Auditor Training - Day 1
Where: NYSWDA Training Center - East Syracuse
Tuesday, May 11, 2010
Time: 9:00 AM - 4:30 PM EST
|
Small Home Auditing
Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.
Agenda
Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
Conduction - A session on how a building loses heat energy by conduction.
Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
Health & Safety - A presentation on the required health & safety tests and how to analyze the results.
Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders
Dates;
Requires attendance on May 11th, 12th, and 13th / 9:00am - 4:30pm (lunch included)
Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters
Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.
Class Size: 16
BPI CEU: 12
Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA
Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors
Click here to register
|
|
|
Event Title: BPI Manufactured Housing Specialist Certification Training
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Tuesday, May 11, 2010
Time: 9:00 AM - 4:30 PM EST
|
|
Manufactured Housing Specialist
Course Description:
This four day course will prepare you to successfully pass the BPI Manufactured Housing Specialist Certification written and field tests. As part of this training, BPI standards and work practices will be reviewed. Attendees will look at common problem areas during the course of an energy audit and prepare a workscope to remedy these issues. Topics addressed will include typical manufactured home construction, heating system basics, distribution system evaluation and repairs, belly repair, air sealing and insulation best practices. Because of the large amount of BPI building analyst curriculum incorporated into this training, it is strongly recommended that attendees hold BPI Building Analyst certification and have a good working knowledge of auditing procedures. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test.
Agenda
Day 1: Pre-Test
MH Overview/ Construction Standards
BPI Standards and Best Work Practices
Heating and Distribution Systems
Day 2: Overview of Belly Repairs
Overview of Roof Insulation installation
Overview of sidewall insulation installation
Door & Window Replacement
Day 3: Manufactured Housing Audit
CAZ Testing Lab
Work Practice Lab
Work Scope Development
Day 4: Review of BA Standards
Review of MH Standards
Written MH Test
Who Should Attend:
Auditors/Energy Analysts with strong auditing skills
Dates;
Course covers the dates of May 11th through May 14th
Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete
Prerequisites: BPI Building Analyst certification
Class Size: 12
BPI CEU: N/A - this course is for BPI certification
Instructors:
Matt Redmond, Al McMahon, and Chris Peters - all NYSWDA trainers are certified BPI professionals with proctor certification.
Other Notes:
For agencies to comply with DHCR staff certification regulations only one Manufactured Housing Specialist is required per agency. Because of the high number of trainees expected, please limit registrations to two attendees per agency. See PPM- Subgrantee Staff Certification Requirements for more information. Bring your auditing bags with meters and appropriate work clothes.
Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.
Course fees include "Your Mobile Home: Energy and Repair Guide" by John Krigger
BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test
|
|
Wednesday, May 12, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Small Home Auditor Training - Day 2
Where: NYSWDA Training Center - East Syracuse
Wednesday, May 12, 2010
Time: 9:00 AM - 4:30 PM EST
|
Small Home Auditing
Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.
Agenda
Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
Conduction - A session on how a building loses heat energy by conduction.
Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
Health & Safety - A presentation on the required health & safety tests and how to analyze the results.
Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders
Dates;
Requires attendance on May 11th, 12th, and 13th / 9:00am - 4:30pm (lunch included)
Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters
Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.
Class Size: 16
BPI CEU: 12
Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA
Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors
Click here to register
|
|
|
|
Event Title: BPI Manufactured Housing Specialist Certification Training
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Wednesday, May 12, 2010
Time: 9:00 AM - 4:30 PM EST
|
|
Manufactured Housing Specialist
Course Description:
This four day course will prepare you to successfully pass the BPI Manufactured Housing Specialist Certification written and field tests. As part of this training, BPI standards and work practices will be reviewed. Attendees will look at common problem areas during the course of an energy audit and prepare a workscope to remedy these issues. Topics addressed will include typical manufactured home construction, heating system basics, distribution system evaluation and repairs, belly repair, air sealing and insulation best practices. Because of the large amount of BPI building analyst curriculum incorporated into this training, it is strongly recommended that attendees hold BPI Building Analyst certification and have a good working knowledge of auditing procedures. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test.
Agenda
Day 1: Pre-Test
MH Overview/ Construction Standards
BPI Standards and Best Work Practices
Heating and Distribution Systems
Day 2: Overview of Belly Repairs
Overview of Roof Insulation installation
Overview of sidewall insulation installation
Door & Window Replacement
Day 3: Manufactured Housing Audit
CAZ Testing Lab
Work Practice Lab
Work Scope Development
Day 4: Review of BA Standards
Review of MH Standards
Written MH Test
Who Should Attend:
Auditors/Energy Analysts with strong auditing skills
Dates;
Course covers the dates of May 11th through May 14th
Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete
Prerequisites: BPI Building Analyst certification
Class Size: 12
BPI CEU: N/A - this course is for BPI certification
Instructors:
Matt Redmond, Al McMahon, and Chris Peters - all NYSWDA trainers are certified BPI professionals with proctor certification.
Other Notes:
For agencies to comply with DHCR staff certification regulations only one Manufactured Housing Specialist is required per agency. Because of the high number of trainees expected, please limit registrations to two attendees per agency. See PPM- Subgrantee Staff Certification Requirements for more information. Bring your auditing bags with meters and appropriate work clothes.
Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.
Course fees include "Your Mobile Home: Energy and Repair Guide" by John Krigger
BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test
|
|
Thursday, May 13, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Small Home Auditor Training - Day 3
Where: NYSWDA Training Center - East Syracuse
Thursday, May 13, 2010
Time: 9:00 AM - 4:30 PM EST
|
Small Home Auditing
Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.
Agenda
Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
Conduction - A session on how a building loses heat energy by conduction.
Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
Health & Safety - A presentation on the required health & safety tests and how to analyze the results.
Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders
Dates;
Requires attendance on May 11th, 12th, and 13th / 9:00am - 4:30pm (lunch included)
Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters
Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.
Class Size: 16
BPI CEU: 12
Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA
Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors
Click here to register
|
|
|
|
Event Title: BPI Manufactured Housing Specialist Certification Training
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Thursday, May 13, 2010
Time: 9:00 AM - 4:30 PM EST
|
|
Manufactured Housing Specialist
Course Description:
This four day course will prepare you to successfully pass the BPI Manufactured Housing Specialist Certification written and field tests. As part of this training, BPI standards and work practices will be reviewed. Attendees will look at common problem areas during the course of an energy audit and prepare a workscope to remedy these issues. Topics addressed will include typical manufactured home construction, heating system basics, distribution system evaluation and repairs, belly repair, air sealing and insulation best practices. Because of the large amount of BPI building analyst curriculum incorporated into this training, it is strongly recommended that attendees hold BPI Building Analyst certification and have a good working knowledge of auditing procedures. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test.
Agenda
Day 1: Pre-Test
MH Overview/ Construction Standards
BPI Standards and Best Work Practices
Heating and Distribution Systems
Day 2: Overview of Belly Repairs
Overview of Roof Insulation installation
Overview of sidewall insulation installation
Door & Window Replacement
Day 3: Manufactured Housing Audit
CAZ Testing Lab
Work Practice Lab
Work Scope Development
Day 4: Review of BA Standards
Review of MH Standards
Written MH Test
Who Should Attend:
Auditors/Energy Analysts with strong auditing skills
Dates;
Course covers the dates of May 11th through May 14th
Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete
Prerequisites: BPI Building Analyst certification
Class Size: 12
BPI CEU: N/A - this course is for BPI certification
Instructors:
Matt Redmond, Al McMahon, and Chris Peters - all NYSWDA trainers are certified BPI professionals with proctor certification.
Other Notes:
For agencies to comply with DHCR staff certification regulations only one Manufactured Housing Specialist is required per agency. Because of the high number of trainees expected, please limit registrations to two attendees per agency. See PPM- Subgrantee Staff Certification Requirements for more information. Bring your auditing bags with meters and appropriate work clothes.
Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.
Course fees include "Your Mobile Home: Energy and Repair Guide" by John Krigger
BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test
|
|
Friday, May 14, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
Event Title: Clean and Tune Procedures
Where: NYSWDA Training Center - East Syracuse
Friday, May 14, 2010
Time: 9:00 AM - 4:00 PM EST
|
Clean and Tune Procedures
This training is for:
Weatherization Directors, Auditors, Heating Techs, Heating Subcontractors.
Course Description:
Agencies working on 1 - 4 family dwellings will now have a method of ensuring technicians performing WAP heating services have DHCR and DOE specifications on what constitutes a proper heating system clean and tune. Agencies may find the information useful in writing bid proposals, and for inspection of completed work. Heating Subcontractors are urged to attend. This course is useful as a first step into performing heating system clean and tunes in-house.
Agenda:
Morning session - classroom presentation
Afternoon session - consists of hands-on lab training on an oil boiler and natural gas forced hot air furnace
Prerequisites: None
Class Size: 10
BPI CEU: 3
Instructors: Adam Harris - NYSWDA
Course Fees:
$50/person (members), $150/person (affiliate members), $200/person (non-members)
Click here to register
|
|
|
|
Event Title: BPI Manufactured Housing Specialist Certification Training
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Friday, May 14, 2010
Time: 9:00 AM - 3:30 PM EST
|
|
Manufactured Housing Specialist
Course Description:
This four day course will prepare you to successfully pass the BPI Manufactured Housing Specialist Certification written and field tests. As part of this training, BPI standards and work practices will be reviewed. Attendees will look at common problem areas during the course of an energy audit and prepare a workscope to remedy these issues. Topics addressed will include typical manufactured home construction, heating system basics, distribution system evaluation and repairs, belly repair, air sealing and insulation best practices. Because of the large amount of BPI building analyst curriculum incorporated into this training, it is strongly recommended that attendees hold BPI Building Analyst certification and have a good working knowledge of auditing procedures. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test.
Agenda
Day 1: Pre-Test
MH Overview/ Construction Standards
BPI Standards and Best Work Practices
Heating and Distribution Systems
Day 2: Overview of Belly Repairs
Overview of Roof Insulation installation
Overview of sidewall insulation installation
Door & Window Replacement
Day 3: Manufactured Housing Audit
CAZ Testing Lab
Work Practice Lab
Work Scope Development
Day 4: Review of BA Standards
Review of MH Standards
Written MH Test
Who Should Attend:
Auditors/Energy Analysts with strong auditing skills
Dates;
Course covers the dates of May 11th through May 14th
Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete
Prerequisites: BPI Building Analyst certification
Class Size: 12
BPI CEU: N/A - this course is for BPI certification
Instructors:
Matt Redmond, Al McMahon, and Chris Peters - all NYSWDA trainers are certified BPI professionals with proctor certification.
Other Notes:
For agencies to comply with DHCR staff certification regulations only one Manufactured Housing Specialist is required per agency. Because of the high number of trainees expected, please limit registrations to two attendees per agency. See PPM- Subgrantee Staff Certification Requirements for more information. Bring your auditing bags with meters and appropriate work clothes.
Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.
Course fees include "Your Mobile Home: Energy and Repair Guide" by John Krigger
BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test
|
|
|
Event Title: Safety Program Builder
Where: NYSWDA Training Center - East Syracuse
Friday, May 14, 2010
Time: 9:00 AM - 3:00 PM EST
|
|
Safety Program Builder
Course Description:
If you are under the impression that a proper safety program:
· is expensive
· will take up too much valuable time
· is such a huge undertaking that you will never be able to put one together
THEN YOU ARE WRONG!
NYSWDA has procured the services of two nationally-recognized leaders in the area of safety. Business and Legal Reports (BLR), and MSDS online have been procured for the benefit of the entire state weatherization network for a three year period at no cost to you. We strongly urge you to take advantage of this safety resource and join us for a one-day training session on how to use the online resource and how to build a proper safety plan. BLR and MSDS will provide you with a written plan template, access to an online MSDS database, and toolbox meeting resources.
Bill Manning, our OSHA Authorized Construction Trainer, as well as staff from BLR and MSDSonline will be available to answer your questions and to show you the resources available. We will go over the steps to creating your own safety program.
THIS ONE DAY COURSE WILL SHOW YOU WHAT IS AVAILABLE TO HELP YOU TO IMPLEMENT AND MAINTAIN A SAFETY PROGRAM WITHIN YOUR ORGANIZATION.
Agenda:
OSHA REQUIREMENTS
DEVELOPING A SAFETY PROGRAM
BLR RESOURCES
MSDS ONLINE SERVICES
RECORD KEEPING REQUIREMENTS
Who Should Attend;
Directors and/or staff members of agency safety committees and facilities personnel able to identifying safety issues at your location to help customize your agency's safety plan.
Class Size: 16
BPI CEU: N/A
Instructor: Bill Manning - NYSWDA
Course Fees:
$20/person (WAP members only)
|
|
Monday, May 17, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 1
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Monday, May 17, 2010
Time: 11:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 17th through 21st
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$250/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Tuesday, May 18, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 2
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Tuesday, May 18, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 17th through 21st
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$250/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
|
|
Event Title: Safety Program Builder
Where: Wyoming County Community Action, Inc. - Perry
Tuesday, May 18, 2010
Time: 9:00 AM - 3:00 PM EST
|
|
Safety Program Builder
Please choose another training location - Wyoming County training cancelled.
|
|
Wednesday, May 19, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
Event Title: 90% Furnace Install
Where: NYSWDA Training Center - East Syracuse
Wednesday, May 19, 2010
Time: 9:00 AM - 4:00 PM EST
|
|
90% Furnace Install
This training is for:
EXPERIENCED HVAC techs
Course Description:
With the weatherization cost per unit average being increased from $4,500 to $6,500 per home, there is a great opportunity to install higher efficiency heating appliances. 90% Install is a training for EXPERIENCED HVAC techs looking to sharpen their install skills. In this training, attendees will cut and thread black iron pipe, become Tracpipe certified, work with high and low voltage wiring and learn to field manufacture plenum connections with common hand tools. Venting code and manufacturer specifications will also be a high priority in this hands on training. Everything you need to know about 90% furnace installations is rolled into this training.
Agenda:
Day 1 - will cover tools and their use, removal of old furnace, LSW review, preparing new furnace and duct connections.
Day 2 - will cover installation guidelines, fuel connections, electric connections, venting/condensate removal, system start-up and job evaluation.
Both days consist of half classroom / half lab work
Dates;
Course covers the dates of May 19th & 20th
Prerequisites: Working knowledge of HVAC systems.
Class Size: 8
BPI CEU: 6
Instructors: Adam Harris - NYSWDA
Course Fees:
$120/person (members), $220/person (affiliate members), $420/person
(non-members)
Course fees include lunch and safety equipment used in the class
|
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 3
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Wednesday, May 19, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 17th through 21st
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$250/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
|
|
Event Title: Safety Program Builder
Where: Tioga Opportunities Program, Inc. - Owego
Wednesday, May 19, 2010
Time: 9:00 AM - 3:00 PM EST
|
Safety Program Builder
Course Description:
If you are under the impression that a proper safety program:
· is expensive
· will take up too much valuable time
· is such a huge undertaking that you will never be able to put one together
THEN YOU ARE WRONG!
NYSWDA has procured the services of two nationally-recognized leaders in the area of safety. Business and Legal Reports (BLR), and MSDS online have been procured for the benefit of the entire state weatherization network for a three year period at no cost to you. We strongly urge you to take advantage of this safety resource and join us for a one-day training session on how to use the online resource and how to build a proper safety plan. BLR and MSDS will provide you with a written plan template, access to an online MSDS database, and toolbox meeting resources.
Bill Manning, our OSHA Authorized Construction Trainer, as well as staff from BLR and MSDSonline will be available to answer your questions and to show you the resources available. We will go over the steps to creating your own safety program.
THIS ONE DAY COURSE WILL SHOW YOU WHAT IS AVAILABLE TO HELP YOU TO IMPLEMENT AND MAINTAIN A SAFETY PROGRAM WITHIN YOUR ORGANIZATION.
Agenda:
OSHA REQUIREMENTS
DEVELOPING A SAFETY PROGRAM
BLR RESOURCES
MSDS ONLINE SERVICES
RECORD KEEPING REQUIREMENTS
Who Should Attend;
Directors and/or staff members of agency safety committees and facilities personnel able to identifying safety issues at your location to help customize your agency's safety plan.
Class Size: 16
BPI CEU: N/A
Instructor: Bill Manning - NYSWDA
Course Fees:
$20/person (WAP members only)
Click here to register
|
|
Thursday, May 20, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: 90% Furnace Install
Where: NYSWDA Training Center - East Syracuse
Thursday, May 20, 2010
Time: 9:00 AM - 4:00 PM EST
|
|
90% Furnace Install
This training is for:
EXPERIENCED HVAC techs
Course Description:
With the weatherization cost per unit average being increased from $4,500 to $6,500 per home, there is a great opportunity to install higher efficiency heating appliances. 90% Install is a training for EXPERIENCED HVAC techs looking to sharpen their install skills. In this training, attendees will cut and thread black iron pipe, become Tracpipe certified, work with high and low voltage wiring and learn to field manufacture plenum connections with common hand tools. Venting code and manufacturer specifications will also be a high priority in this hands on training. Everything you need to know about 90% furnace installations is rolled into this training.
Agenda:
Day 1 - will cover tools and their use, removal of old furnace, LSW review, preparing new furnace and duct connections.
Day 2 - will cover installation guidelines, fuel connections, electric connections, venting/condensate removal, system start-up and job evaluation.
Both days consist of half classroom / half lab work
Dates;
Course covers the dates of May 19th & 20th
Prerequisites: Working knowledge of HVAC systems.
Class Size: 8
BPI CEU: 6
Instructors: Adam Harris - NYSWDA
Course Fees:
$120/person (members), $220/person (affiliate members), $420/person
(non-members)
Course fees include lunch and safety equipment used in the class
|
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 4
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Thursday, May 20, 2010
Time: 9:00 AM - 5:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 17th through 21st
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$250/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
|
|
Event Title: Safety Program Builder
Where: Adirondack Community Action Programs - Essex County - Elizabethtown
Thursday, May 20, 2010
Time: 9:00 AM - 3:00 PM EST
|
Safety Program Builder
Course Description:
If you are under the impression that a proper safety program:
· is expensive
· will take up too much valuable time
· is such a huge undertaking that you will never be able to put one together
THEN YOU ARE WRONG!
NYSWDA has procured the services of two nationally-recognized leaders in the area of safety. Business and Legal Reports (BLR), and MSDS online have been procured for the benefit of the entire state weatherization network for a three year period at no cost to you. We strongly urge you to take advantage of this safety resource and join us for a one-day training session on how to use the online resource and how to build a proper safety plan. BLR and MSDS will provide you with a written plan template, access to an online MSDS database, and toolbox meeting resources.
Bill Manning, our OSHA Authorized Construction Trainer, as well as staff from BLR and MSDSonline will be available to answer your questions and to show you the resources available. We will go over the steps to creating your own safety program.
THIS ONE DAY COURSE WILL SHOW YOU WHAT IS AVAILABLE TO HELP YOU TO IMPLEMENT AND MAINTAIN A SAFETY PROGRAM WITHIN YOUR ORGANIZATION.
Agenda:
OSHA REQUIREMENTS
DEVELOPING A SAFETY PROGRAM
BLR RESOURCES
MSDS ONLINE SERVICES
RECORD KEEPING REQUIREMENTS
Who Should Attend;
Directors and/or staff members of agency safety committees and facilities personnel able to identifying safety issues at your location to help customize your agency's safety plan.
Class Size: 16
BPI CEU: N/A
Instructor: Bill Manning - NYSWDA
Course Fees:
$20/person (WAP members only)
Click here to register
|
|
Friday, May 21, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Entry Level Weatherization Installer Boot Camp - Day 5
Where: NYSWDA - Taft Road Energy Efficiency Training Center - North Syracuse
Friday, May 21, 2010
Time: 9:00 AM - 12:00 PM EST
|
Boot Camp
Course Description:
This intensive 5-day training based at NYSWDA's new Taft Road Energy Efficiency Training Center is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.
During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.
All three DHCR mandatory trainings are covered in this course:
- Air Sealing
- Health & Safety
- Lead Safe Weatherization
For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION
Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE
Who Should Attend:
Entry level field staff and weatherization contractors
Dates;
Course covers the dates of May 17th through 21st
Start Time: Monday 11:00am / Tuesday-Friday 9:00am
End Time: Monday 5:00pm / Tuesday-Thursday 5:00pm / Friday 12:00pm
Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.
Prerequisites: None
Class Size: 28
BPI CEU: 13.25
Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.
Course Fees;
$250/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors
NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.
|
|
Monday, May 24, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Safety Program Builder
Where: Albany Coop Ext. - Voorheesville
Monday, May 24, 2010
Time: 9:00 AM - 3:00 PM EST
|
Safety Program Builder
Course Description:
If you are under the impression that a proper safety program:
· is expensive
· will take up too much valuable time
· is such a huge undertaking that you will never be able to put one together
THEN YOU ARE WRONG!
NYSWDA has procured the services of two nationally-recognized leaders in the area of safety. Business and Legal Reports (BLR), and MSDS online have been procured for the benefit of the entire state weatherization network for a three year period at no cost to you. We strongly urge you to take advantage of this safety resource and join us for a one-day training session on how to use the online resource and how to build a proper safety plan. BLR and MSDS will provide you with a written plan template, access to an online MSDS database, and toolbox meeting resources.
Bill Manning, our OSHA Authorized Construction Trainer, as well as staff from BLR and MSDSonline will be available to answer your questions and to show you the resources available. We will go over the steps to creating your own safety program.
THIS ONE DAY COURSE WILL SHOW YOU WHAT IS AVAILABLE TO HELP YOU TO IMPLEMENT AND MAINTAIN A SAFETY PROGRAM WITHIN YOUR ORGANIZATION.
Agenda:
OSHA REQUIREMENTS
DEVELOPING A SAFETY PROGRAM
BLR RESOURCES
MSDS ONLINE SERVICES
RECORD KEEPING REQUIREMENTS
Who Should Attend;
Directors and/or staff members of agency safety committees and facilities personnel able to identifying safety issues at your location to help customize your agency's safety plan.
Class Size: 16
BPI CEU: N/A
Instructor: Bill Manning - NYSWDA
Course Fees:
$20/person (WAP members only)
Click here to register
|
|
Tuesday, May 25, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: Safety Program Builder
Where: Regional Economic Comm. Action Program, Inc. - Middletown
Tuesday, May 25, 2010
Time: 9:00 AM - 3:00 PM EST
|
|
Safety Program Builder
Please choose the Albany Co-op training location on 5/24 as an alternative.
|
|
|
|
Event Title: OSHA 10 Hour Construction Health & Safety
Where: Regional Economic Comm. Action Program, Inc. - Middletown
Tuesday, May 25, 2010
Time: 9:00 AM - 3:30 PM EST
|
OSHA 10 Hour Construction Safety
Certificate Course - Day 1
This training is for:
Agency Safety Programs Administrators, Auditors and Field Staff. Also open to all building contractors.
Course Description:
Working in a safe manner on the job is as much an employee responsibility as it is for management to provide a safe work environment. This two-day course is an OSHA-authorized educational outreach program and will result in the issue of an OSHA 10-Hour Construction Safety Certificate upon successful completion of both days. OSHA has a curriculum that includes 6 hours of mandatory material, and allows for 4 hours of elective material. NYSWDA has examined the OSHA requirements and created a program focusing on the Weatherization jobsite and general construction safety.
Agenda:
This course will focus on safe working practices on the Weatherization and general construction job site.
Prerequisites: None
Class Size: 16
BPI CEU: 2.5 (Day 1) 2.8 (Day 2)
Instructors: Bill Manning - NYSWDA
Course Fees;
$100/person (covers both days), Weatherization Staff and NYSWDA members, $300/person affiliate members, $400/person Private Contractors
Click here to register
|
|
|
Event Title: ESB Subgrantee Database Training
Where: NYSWDA Training Center - East Syracuse
Tuesday, May 25, 2010
Time: 10:00 AM - 3:30 PM EST
|
ESB Database Training
This training is for:
AM and PM Sessions - WAP Subgrantees new to the ESB 2.19 Subgrantee Database System. This includes the Eastern, Western and Central Regions only.
CHOOSE EITHER A.M. OR P.M. SESSION
Course Description:
The course will provide background on the ESB 2.19 Subgrantee Database with a focus on entering buildings, clients, costs, Cumulative Financial Reports (CFR) and exporting data.
Agenda:
10:00 AM - 1:00 PM - Overview of the ESB Database for Subgrantees
- Entering buildings
- Entering clients
- Entering costs
- Entering CFR's
- Exporting Buildings and CFR's for payment
- Running Reports (Filters and Sort functions)
1:30 PM - 3:30 PM - Overview of the ESB Database for Subgrantees
- Entering certification and inspections
- Entering changes prior to certification
- Moving buildings from contract to contract
- Exporting data
- Overview of the ESB Central Database
- Importing the export files
- Running Reports
Other Notes:
You are encouraged to bring your own laptop. If not, one will be provided for you.
Prerequisites: None
Class Size: 25
BPI CEU: N/A
Instructors: Linda Sturges / DHCR - Syracuse Regional Rep.
Course Fees:
none
|
|
Wednesday, May 26, 2010 (3 4 5 6 7 10 11 12 13 14 17 18 19 20 21 24 25 26)
|
|
|
Event Title: OSHA 10 Hour Construction Health & Safety
Where: Regional Economic Comm. Action Program, Inc. - Middletown
Wednesday, May 26, 2010
Time: 9:00 AM - 3:30 PM EST
|
OSHA 10 Hour Construction Safety
Certificate Course - Day 2
This training is for:
Agency Safety Programs Administrators, Auditors and Field Staff. Also open to all building contractors.
Course Description:
Working in a safe manner on the job is as much an employee responsibility as it is for management to provide a safe work environment. This two-day course is an OSHA-authorized educational outreach program and will result in the issue of an OSHA 10-Hour Construction Safety Certificate upon successful completion of both days. OSHA has a curriculum that includes 6 hours of mandatory material, and allows for 4 hours of elective material. NYSWDA has examined the OSHA requirements and created a program focusing on the Weatherization jobsite and general construction safety.
Agenda:
This course will focus on safe working practices on the Weatherization and general construction job site.
Prerequisites: None
Class Size: 16
BPI CEU: 2.5 (Day 1) 2.8 (Day 2)
Instructors: Bill Manning - NYSWDA
Course Fees;
$100/person (covers both days), Weatherization Staff and NYSWDA members, $300/person affiliate members, $400/person Private Contractors
Click here to register
|
|
|