Event Title: Entry Level Weatherization Installer Boot Camp - Day 1

Where: NYSWDA Training Center, Building II, East Syracuse

Monday, January 3, 2011

Time: 11:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Boot Camp

Course Description:
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.

During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.

All three DHCR mandatory trainings are covered in this course:

• Air Sealing
• Health & Safety
• Lead Safe Weatherization

For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION


Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE


Who Should Attend:
Entry level field staff and weatherization contractors


Dates;
Course covers the dates of January 3rd through 6th

Start Time: Monday 11:00am/Tues.-Thurs. 9:00am
End Time: Monday - Thursday 4:30pm


Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.


Prerequisites: None


Class Size: 16


BPI CEU: 13.25


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.


Course Fees;
$200/person - Weatherization Staff and NYSWDA members
$600/person - affiliate members
$800/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.

Event Title: Entry Level Weatherization Installer Boot Camp - Day 2

Where: NYSWDA Training Center, Building II, East Syracuse

Tuesday, January 4, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Boot Camp

Course Description:
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.

During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.

All three DHCR mandatory trainings are covered in this course:

• Air Sealing
• Health & Safety
• Lead Safe Weatherization

For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION


Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE


Who Should Attend:
Entry level field staff and weatherization contractors


Dates;
Course covers the dates of January 3rd through 6th

Start Time: Monday 11:00am/Tues.-Thurs. 9:00am
End Time: Monday - Thursday 4:30pm


Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.


Prerequisites: None


Class Size: 16


BPI CEU: 13.25


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.


Course Fees;
$200/person - Weatherization Staff and NYSWDA members
$600/person - affiliate members
$800/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.

Event Title: BPI Heating Professional Certification Training

Where: NYSWDA Training Center - East Syracuse

Tuesday, January 4, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

Heat Tech

Course Description:
This four day course, which includes classroom and heating lab sessions, will prepare you to successfully pass the BPI Heating Professional written and field tests. Using NYSWDA's state-of-the art Heating Lab, attendees will train on 15 of the most common residential heating systems, from 70% efficient atmospheric furnaces to 90%+ efficient two-stage ECM blower furnaces. Additionally, trainees will become knowledgeable on gas and oil-fired hydronic boilers, their controls and components. Attendees will be introduced to system load and sizing concepts, system design, duct system diagnostics, and proper maintenance and efficiency analysis. This is a challenging course, and as such, NYSWDA strongly recommends that attendees hold BPI Building Analyst certification and have strong HVAC experience. After the trainees successfully complete the written portion of the test, we will schedule them to return for the field test.

Agenda
Day 1: AM - classroom / PM - Heating Lab
Day 2: AM - classroom / PM - Heating Lab
Day 3: AM - all day labs
Day 4: AM - review / PM - written test


Who Should Attend:
Auditors, Building Analysts, HVAC professionals


Dates;
Course covers the dates of January 4th - 11th

Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 4:00pm / Friday test starts at 1:00pm with 1 1/2 hours to complete


Prerequisites: BPI Building Analyst certification


Class Size: 8


BPI CEU: 6


Instructors:
Adam Harris / Lead HVAC Instructor/trainer


Other Notes:
Trainees lacking HVAC experience are strongly recommended to attend NYSWDA's entry-level HVAC trainings. Please refer to NYSWDA's training calendar or contact Adam Harris for additional training information.


Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.


BPI Fees;
$150/person - 50-question written test
$350/person - Field test



Click here to register

Event Title: Entry Level Weatherization Installer Boot Camp - Day 3

Where: NYSWDA Training Center, Building II, East Syracuse

Wednesday, January 5, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Boot Camp

Course Description:
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.

During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.

All three DHCR mandatory trainings are covered in this course:

• Air Sealing
• Health & Safety
• Lead Safe Weatherization

For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION


Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE


Who Should Attend:
Entry level field staff and weatherization contractors


Dates;
Course covers the dates of January 3rd through 6th

Start Time: Monday 11:00am/Tues.-Thurs. 9:00am
End Time: Monday - Thursday 4:30pm


Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.


Prerequisites: None


Class Size: 16


BPI CEU: 13.25


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.


Course Fees;
$200/person - Weatherization Staff and NYSWDA members
$600/person - affiliate members
$800/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.

Event Title: BPI Heating Professional Certification Training

Where: NYSWDA Training Center - East Syracuse

Wednesday, January 5, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

Heat Tech

Course Description:
This four day course, which includes classroom and heating lab sessions, will prepare you to successfully pass the BPI Heating Professional written and field tests. Using NYSWDA's state-of-the art Heating Lab, attendees will train on 15 of the most common residential heating systems, from 70% efficient atmospheric furnaces to 90%+ efficient two-stage ECM blower furnaces. Additionally, trainees will become knowledgeable on gas and oil-fired hydronic boilers, their controls and components. Attendees will be introduced to system load and sizing concepts, system design, duct system diagnostics, and proper maintenance and efficiency analysis. This is a challenging course, and as such, NYSWDA strongly recommends that attendees hold BPI Building Analyst certification and have strong HVAC experience. After the trainees successfully complete the written portion of the test, we will schedule them to return for the field test.

Agenda
Day 1: AM - classroom / PM - Heating Lab
Day 2: AM - classroom / PM - Heating Lab
Day 3: AM - all day labs
Day 4: AM - review / PM - written test


Who Should Attend:
Auditors, Building Analysts, HVAC professionals


Dates;
Course covers the dates of January 4th - 11th

Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 4:00pm / Friday test starts at 1:00pm with 1 1/2 hours to complete


Prerequisites: BPI Building Analyst certification


Class Size: 8


BPI CEU: 6


Instructors:
Adam Harris / Lead HVAC Instructor/trainer


Other Notes:
Trainees lacking HVAC experience are strongly recommended to attend NYSWDA's entry-level HVAC trainings. Please refer to NYSWDA's training calendar or contact Adam Harris for additional training information.


Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.


BPI Fees;
$150/person - 50-question written test
$350/person - Field test



Click here to register

Event Title: Entry Level Weatherization Installer Boot Camp - Day 4

Where: NYSWDA Training Center, Building II, East Syracuse

Thursday, January 6, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Boot Camp

Course Description:
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation installation. Using our state-of-the-art realistic wall, ceiling and attic props, trainees will learn the techniques needed to effectively weatherize our clients' homes.

During this course, the trainees will be introduced to both DHCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing operations.

All three DHCR mandatory trainings are covered in this course:

• Air Sealing
• Health & Safety
• Lead Safe Weatherization

For the complete course description details - click on: BOOT CAMP FULL COURSE DESCRIPTION


Agenda
For the complete daily agenda - click on: BOOT CAMP TRAINING SCHEDULE


Who Should Attend:
Entry level field staff and weatherization contractors


Dates;
Course covers the dates of January 3rd through 6th

Start Time: Monday 11:00am/Tues.-Thurs. 9:00am
End Time: Monday - Thursday 4:30pm


Other Notes:
Due to the nature of the training, all attendees will be required to sign a WAIVER OF LIABILITY and a photo/video release form at the start of training.


Prerequisites: None


Class Size: 16


BPI CEU: 13.25


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification. Additional qualifications include EPA Certified Lead Abatement Supervisor and OSHA Outreach trainer.


Course Fees;
$200/person - Weatherization Staff and NYSWDA members
$600/person - affiliate members
$800/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are included for each day.

Event Title: BPI Heating Professional Certification Training

Where: NYSWDA Training Center - East Syracuse

Thursday, January 6, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

Heat Tech

Course Description:
This four day course, which includes classroom and heating lab sessions, will prepare you to successfully pass the BPI Heating Professional written and field tests. Using NYSWDA's state-of-the art Heating Lab, attendees will train on 15 of the most common residential heating systems, from 70% efficient atmospheric furnaces to 90%+ efficient two-stage ECM blower furnaces. Additionally, trainees will become knowledgeable on gas and oil-fired hydronic boilers, their controls and components. Attendees will be introduced to system load and sizing concepts, system design, duct system diagnostics, and proper maintenance and efficiency analysis. This is a challenging course, and as such, NYSWDA strongly recommends that attendees hold BPI Building Analyst certification and have strong HVAC experience. After the trainees successfully complete the written portion of the test, we will schedule them to return for the field test.

Agenda
Day 1: AM - classroom / PM - Heating Lab
Day 2: AM - classroom / PM - Heating Lab
Day 3: AM - all day labs
Day 4: AM - review / PM - written test


Who Should Attend:
Auditors, Building Analysts, HVAC professionals


Dates;
Course covers the dates of January 4th - 11th

Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 4:00pm / Friday test starts at 1:00pm with 1 1/2 hours to complete


Prerequisites: BPI Building Analyst certification


Class Size: 8


BPI CEU: 6


Instructors:
Adam Harris / Lead HVAC Instructor/trainer


Other Notes:
Trainees lacking HVAC experience are strongly recommended to attend NYSWDA's entry-level HVAC trainings. Please refer to NYSWDA's training calendar or contact Adam Harris for additional training information.


Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.


BPI Fees;
$150/person - 50-question written test
$350/person - Field test



Click here to register

Event Title: BPI Heating Professional Certification Training

Where: NYSWDA Training Center - East Syracuse

Friday, January 7, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

Heat Tech

Course Description:
This four day course, which includes classroom and heating lab sessions, will prepare you to successfully pass the BPI Heating Professional written and field tests. Using NYSWDA's state-of-the art Heating Lab, attendees will train on 15 of the most common residential heating systems, from 70% efficient atmospheric furnaces to 90%+ efficient two-stage ECM blower furnaces. Additionally, trainees will become knowledgeable on gas and oil-fired hydronic boilers, their controls and components. Attendees will be introduced to system load and sizing concepts, system design, duct system diagnostics, and proper maintenance and efficiency analysis. This is a challenging course, and as such, NYSWDA strongly recommends that attendees hold BPI Building Analyst certification and have strong HVAC experience. After the trainees successfully complete the written portion of the test, we will schedule them to return for the field test.

Agenda
Day 1: AM - classroom / PM - Heating Lab
Day 2: AM - classroom / PM - Heating Lab
Day 3: AM - all day labs
Day 4: AM - review / PM - written test


Who Should Attend:
Auditors, Building Analysts, HVAC professionals


Dates;
Course covers the dates of January 4th - 11th

Start Time: Tuesday-Friday 9:00am
End Time: Tuesday-Thursday 4:00pm / Friday test starts at 1:00pm with 1 1/2 hours to complete


Prerequisites: BPI Building Analyst certification


Class Size: 8


BPI CEU: 6


Instructors:
Adam Harris / Lead HVAC Instructor/trainer


Other Notes:
Trainees lacking HVAC experience are strongly recommended to attend NYSWDA's entry-level HVAC trainings. Please refer to NYSWDA's training calendar or contact Adam Harris for additional training information.


Course Fees;
$300/person - Weatherization Staff and NYSWDA members
$800/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.


BPI Fees;
$150/person - 50-question written test
$350/person - Field test



Click here to register

Event Title: BPI Building Analyst Course

Where: NYSWDA Training Center - East Syracuse

Monday, January 10, 2011

Time: 9:00 AM - 5:00 PM EST

Import this event into your Outlook calendar

Building Analyst

Course Description:
Building Analyst training provides the foundation of building science through the framework of an audit process to understanding the "how's" and "why's" of building issues: ice dams, mold and indoor air quality. It is the quintessential "house-as-a-system" in what goes on in building durability, comfort and energy usage.

The course provides an understanding of the BPI Building Analyst Standards through classroom studies and in-field activities. The in-field portion of the class will provide hands-on training with gas appliance testing, blower door use and set-up and proper and accurate combustion appliance zone testing in the state-of-the-art NYSWDA Pressure House and Heating Lab.

The class is followed by a review of the BPI standards and the 100-question (2 hour) Building Analyst test. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test..


Agenda
Monday - Building Science Module

Tuesday & Wednesday:
Mornings - Auditing Module
Afternoons - Heating Lab Modules
Afternoons - Pressure House Modules

Thursday - Building Math Module

Friday:
Morning - Standards Review
Afternoon - Test



Who Should Attend:
Building Auditors, experienced Crew Chiefs, anyone looking for BPI BA Certification


Dates;
Course covers the dates of January 10th through 14th

Start Time: Monday-Friday 9:00am
End Time: Monday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete


Prerequisites: None


Class Size: 12


BPI CEU: 8.75


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification.


Course Fees;
$375/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.

BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test

Event Title: BPI Building Analyst Course

Where: NYSWDA Training Center - East Syracuse

Tuesday, January 11, 2011

Time: 9:00 AM - 5:00 PM EST

Import this event into your Outlook calendar

Building Analyst

Course Description:
Building Analyst training provides the foundation of building science through the framework of an audit process to understanding the "how's" and "why's" of building issues: ice dams, mold and indoor air quality. It is the quintessential "house-as-a-system" in what goes on in building durability, comfort and energy usage.

The course provides an understanding of the BPI Building Analyst Standards through classroom studies and in-field activities. The in-field portion of the class will provide hands-on training with gas appliance testing, blower door use and set-up and proper and accurate combustion appliance zone testing in the state-of-the-art NYSWDA Pressure House and Heating Lab.

The class is followed by a review of the BPI standards and the 100-question (2 hour) Building Analyst test. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test..


Agenda
Monday - Building Science Module

Tuesday & Wednesday:
Mornings - Auditing Module
Afternoons - Heating Lab Modules
Afternoons - Pressure House Modules

Thursday - Building Math Module

Friday:
Morning - Standards Review
Afternoon - Test



Who Should Attend:
Building Auditors, experienced Crew Chiefs, anyone looking for BPI BA Certification


Dates;
Course covers the dates of January 10th through 14th

Start Time: Monday-Friday 9:00am
End Time: Monday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete


Prerequisites: None


Class Size: 12


BPI CEU: 8.75


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification.


Course Fees;
$375/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.

BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test

Event Title: BPI Building Analyst Course

Where: NYSWDA Training Center - East Syracuse

Wednesday, January 12, 2011

Time: 9:00 AM - 5:00 PM EST

Import this event into your Outlook calendar

Building Analyst

Course Description:
Building Analyst training provides the foundation of building science through the framework of an audit process to understanding the "how's" and "why's" of building issues: ice dams, mold and indoor air quality. It is the quintessential "house-as-a-system" in what goes on in building durability, comfort and energy usage.

The course provides an understanding of the BPI Building Analyst Standards through classroom studies and in-field activities. The in-field portion of the class will provide hands-on training with gas appliance testing, blower door use and set-up and proper and accurate combustion appliance zone testing in the state-of-the-art NYSWDA Pressure House and Heating Lab.

The class is followed by a review of the BPI standards and the 100-question (2 hour) Building Analyst test. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test..


Agenda
Monday - Building Science Module

Tuesday & Wednesday:
Mornings - Auditing Module
Afternoons - Heating Lab Modules
Afternoons - Pressure House Modules

Thursday - Building Math Module

Friday:
Morning - Standards Review
Afternoon - Test



Who Should Attend:
Building Auditors, experienced Crew Chiefs, anyone looking for BPI BA Certification


Dates;
Course covers the dates of January 10th through 14th

Start Time: Monday-Friday 9:00am
End Time: Monday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete


Prerequisites: None


Class Size: 12


BPI CEU: 8.75


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification.


Course Fees;
$375/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.

BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test

Event Title: BPI Building Analyst Course

Where: NYSWDA Training Center - East Syracuse

Thursday, January 13, 2011

Time: 9:00 AM - 5:00 PM EST

Import this event into your Outlook calendar

Building Analyst

Course Description:
Building Analyst training provides the foundation of building science through the framework of an audit process to understanding the "how's" and "why's" of building issues: ice dams, mold and indoor air quality. It is the quintessential "house-as-a-system" in what goes on in building durability, comfort and energy usage.

The course provides an understanding of the BPI Building Analyst Standards through classroom studies and in-field activities. The in-field portion of the class will provide hands-on training with gas appliance testing, blower door use and set-up and proper and accurate combustion appliance zone testing in the state-of-the-art NYSWDA Pressure House and Heating Lab.

The class is followed by a review of the BPI standards and the 100-question (2 hour) Building Analyst test. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test..


Agenda
Monday - Building Science Module

Tuesday & Wednesday:
Mornings - Auditing Module
Afternoons - Heating Lab Modules
Afternoons - Pressure House Modules

Thursday - Building Math Module

Friday:
Morning - Standards Review
Afternoon - Test



Who Should Attend:
Building Auditors, experienced Crew Chiefs, anyone looking for BPI BA Certification


Dates;
Course covers the dates of January 10th through 14th

Start Time: Monday-Friday 9:00am
End Time: Monday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete


Prerequisites: None


Class Size: 12


BPI CEU: 8.75


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification.


Course Fees;
$375/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.

BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test

Event Title: BPI Building Analyst Course

Where: NYSWDA Training Center - East Syracuse

Friday, January 14, 2011

Time: 9:00 AM - 3:30 PM EST

Import this event into your Outlook calendar

Building Analyst

Course Description:
Building Analyst training provides the foundation of building science through the framework of an audit process to understanding the "how's" and "why's" of building issues: ice dams, mold and indoor air quality. It is the quintessential "house-as-a-system" in what goes on in building durability, comfort and energy usage.

The course provides an understanding of the BPI Building Analyst Standards through classroom studies and in-field activities. The in-field portion of the class will provide hands-on training with gas appliance testing, blower door use and set-up and proper and accurate combustion appliance zone testing in the state-of-the-art NYSWDA Pressure House and Heating Lab.

The class is followed by a review of the BPI standards and the 100-question (2 hour) Building Analyst test. After the trainees successfully complete the written portion of the test, we will schedule them for the Field test..


Agenda
Monday - Building Science Module

Tuesday & Wednesday:
Mornings - Auditing Module
Afternoons - Heating Lab Modules
Afternoons - Pressure House Modules

Thursday - Building Math Module

Friday:
Morning - Standards Review
Afternoon - Test



Who Should Attend:
Building Auditors, experienced Crew Chiefs, anyone looking for BPI BA Certification


Dates;
Course covers the dates of January 10th through 14th

Start Time: Monday-Friday 9:00am
End Time: Monday-Thursday 5:00pm / Friday test starts at 1:00pm with 2 hours to complete


Prerequisites: None


Class Size: 12


BPI CEU: 8.75


Instructors:
NWSWDA staff - all NYSWDA trainers are certified BPI professionals with proctor certification.


Course Fees;
$375/person - Weatherization Staff and NYSWDA members
$750/person - affiliate members
$1,000/person - non-members and private contractors

NYSWDA will not be responsible for hotel costs, travel to and from the training, breakfast and dinner meals, or incidentals. Lunches are ARE NOT included.

BPI Fees;
$200/person - 100-question written BA test
$350/person - Field test

Event Title: Small Home Auditor Training

Where: NYSWDA Training Center - East Syracuse

Tuesday, January 18, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Small Home Auditing


Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.

Agenda

• Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
• Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
• Conduction - A session on how a building loses heat energy by conduction.
• Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
• Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
• Health & Safety - A presentation on the required health & safety tests and how to analyze the results.

Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders


Dates;
Requires attendance on January 18th, 19th, and 20th / 9:00am - 4:30pm (lunch included)


Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters

Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.

Class Size: 16

BPI CEU: 12

Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA


Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors



Click here to register

Event Title: Small Home Auditor Training

Where: NYSWDA Training Center - East Syracuse

Wednesday, January 19, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Small Home Auditing


Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.

Agenda

• Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
• Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
• Conduction - A session on how a building loses heat energy by conduction.
• Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
• Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
• Health & Safety - A presentation on the required health & safety tests and how to analyze the results.

Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders


Dates;
Requires attendance on January 18th, 19th, and 20th / 9:00am - 4:30pm (lunch included)


Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters

Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.

Class Size: 16

BPI CEU: 12

Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA


Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors



Click here to register

Event Title: Small Home Auditor Training

Where: NYSWDA Training Center - East Syracuse

Thursday, January 20, 2011

Time: 9:00 AM - 4:30 PM EST

Import this event into your Outlook calendar

Small Home Auditing


Course Description:
This 3 day Small Home Auditor training incorporates both classroom presentations with hands-on lab sessions enabling new auditors, crew chiefs, and directors to apply their building science skills to real life situations. Topics include client interaction, Building Science, Health & Safety, Heating & Venting, and computer building modeling. NYSWDA's hands-on lab sessions include CO and gas leak detection, worse case CAZ testing, steady state efficiency testing, and blower door/pressure diagnostics operations. This training is limited to 16 attendees so please register early.

Agenda

• Air Sealing - A presentation on the proper use of a blower door and techniques used to air seal a building
• Heating Systems - A presentation covering testing, basic diagnostics and distribution systems.
• Conduction - A session on how a building loses heat energy by conduction.
• Building Modeling - A presentation on how to model a building for energy efficiency and develop a work scope.
• Baseload Measures - A presentation on refrigerator replacement, lighting, and domestic hot water.
• Health & Safety - A presentation on the required health & safety tests and how to analyze the results.

Who Should Attend:
Weatherization Directors, new Auditors and Crew Leaders


Dates;
Requires attendance on January 18th, 19th, and 20th / 9:00am - 4:30pm (lunch included)


Other Notes:
Attendees bring your digital pressure gauges, combustion analyzers, and CO meters

Prerequisites:
Must have completed Air Sealing and Weatherization Health & Safety training prior to taking this course.

Class Size: 16

BPI CEU: 12

Instructors:
Wayne Miller - DHCR / Chris Peters - NYSWDA


Course Fees;
$150/person (covers all 3 days), Weatherization Staff and NYSWDA members, $450/person affiliate members, $600/person Private Contractors



Click here to register

Event Title: 90% Furnace Install

Where: NYSWDA Training Center - East Syracuse

Wednesday, January 26, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

90% Furnace Install

This training is for:
EXPERIENCED HVAC techs


Course Description:
With the weatherization cost per unit average being increased from $4,500 to $6,500 per home, there is a great opportunity to install higher efficiency heating appliances. 90% Install is a training for EXPERIENCED HVAC techs looking to sharpen their install skills. In this training, attendees will cut and thread black iron pipe, become Tracpipe certified, work with high and low voltage wiring and learn to field manufacture plenum connections with common hand tools. Venting code and manufacturer specifications will also be a high priority in this hands on training. Everything you need to know about 90% furnace installations is rolled into this training.



Agenda:
Day 1 - will cover tools and their use, removal of old furnace, LSW review, preparing new furnace and duct connections.

Day 2 - will cover installation guidelines, fuel connections, electric connections, venting/condensate removal, system start-up and job evaluation.

Both days consist of half classroom / half lab work


Dates;
Course covers the dates of January 26th & 27th


Prerequisites: Working knowledge of HVAC systems.


Class Size: 8


BPI CEU: 6


Instructors: Adam Harris - NYSWDA


Course Fees:
$120/person (members), $220/person (affiliate members), $420/person
(non-members)
Course fees include lunch and safety equipment used in the class

Event Title: 90% Furnace Install

Where: NYSWDA Training Center - East Syracuse

Thursday, January 27, 2011

Time: 9:00 AM - 4:00 PM EST

Import this event into your Outlook calendar

90% Furnace Install

This training is for:
EXPERIENCED HVAC techs


Course Description:
With the weatherization cost per unit average being increased from $4,500 to $6,500 per home, there is a great opportunity to install higher efficiency heating appliances. 90% Install is a training for EXPERIENCED HVAC techs looking to sharpen their install skills. In this training, attendees will cut and thread black iron pipe, become Tracpipe certified, work with high and low voltage wiring and learn to field manufacture plenum connections with common hand tools. Venting code and manufacturer specifications will also be a high priority in this hands on training. Everything you need to know about 90% furnace installations is rolled into this training.



Agenda:
Day 1 - will cover tools and their use, removal of old furnace, LSW review, preparing new furnace and duct connections.

Day 2 - will cover installation guidelines, fuel connections, electric connections, venting/condensate removal, system start-up and job evaluation.

Both days consist of half classroom / half lab work


Dates;
Course covers the dates of January 26th & 27th


Prerequisites: Working knowledge of HVAC systems.


Class Size: 8


BPI CEU: 6


Instructors: Adam Harris - NYSWDA


Course Fees:
$120/person (members), $220/person (affiliate members), $420/person
(non-members)
Course fees include lunch and safety equipment used in the class