Training Location: NYSWDA Training Center (Building 2) - 58 69 Fisher Road, East Syracuse, NY 13057
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Who Should Attend;
Entry level field staff and weatherization contractors - see detailed below.
ÂÂÂÂ
Course
This intensive 4-day training based at NY SWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealin g, dense pack and loose fill cellulose insulation installation. Using our s tate-of-the-art realistic wall, ceiling and attic props, trainees will lear n the techniques needed to effectively weatherize our clients' homes.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
During this course, the tr ainees will be introduced to both HCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing op erations.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
All three H CR mandatory trainings are covered in this course:
Pl
ease reference the WAP Policies and Procedures manual for further details.
The above-listed trainings are mandatory for the positions stated. If a sub
grantee hires a new employee into one of these postions, or a current emplo
yee transfers into one of these positions, it is mandatory that they receiv
e this training within six (6) months of their start date. These mandatory
training sessions must be repeated every three (3) years by subgrantee pers
onnel who occupy these positions.
Agenda;
Day One
Monday - 11:00am - 4:30pm: Residential Health & Saf
ety Fundamentals
ÂÂÂÂ < /span>
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Se
aling Techniques, introduction to infrared cameras, introduction to basic r
esidential framing details with an emphasis on common air sealing areas and
building codes requirements for clearance to combustibles.
ÂÂÂÂ
Day Three
ÂÂÂÂ
Day Four
Thursday - 9:00am - 3:00pm: All day la
b session tool/equipment safety, lead safe jobsite setup, air sealing techn
iques, dense pack and loose fill cellulose installation techniques. Afterno
on lab session: fundamentals of blower door setup and operation, plus jobsi
te and lead safe cleanup skills, training skills review, question and answe
r session, awarding of Certificates of Completion
<
/span>
Dates;
Course covers the dates of October 6-9
Start Times
: Monday 11:00am the Tues.-Thurs. 9:00am
End Times: Mond ay - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂ ÂÂÂ
Other Notes:
Due to
the nature of the training, all attendees will be required to sign a waiver
of liability and a photo/video release form at the start of the training.<
/span>
P rerequisites: None
Class Size:
16
BPI CEU
: 16
Instructors:ÂAl McMahon, NYSWDA
<
/p>
Course Fees;Valued at $1,450*
$425/person - Weatherization Sub-grantees70% Savings< /span>
$475/person - affiliate members 67% Savings
$600/person - non-members and private contractors 58% Savings
ÂÂÂÂÂÂÂÂÂÂÂÂ
*Through the support of a grant from NYSERDA an d NYS HCR funding, we are able to continue to provide quality training at a n affordable price.
ÂÂÂÂÂÂÂ ÂÂÂÂ
NYSWDA will not be responsible for hotel costs, t
ravel to and from the training, breakfast and dinner meals, or incidentals.
Lunches are included for each day.
Click
here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
X-ALT-DESC;FMTTYPE=text/html:Training Location: NYSWDA Training Center (Building 2) - 58 69 Fisher Road, East Syracuse, NY 13057
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Who Should Attend;
Entry level field staff and weatherization contractors - see detailed below.
ÂÂÂÂ
Course
This intensive 4-day training based at NY SWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealin g, dense pack and loose fill cellulose insulation installation. Using our s tate-of-the-art realistic wall, ceiling and attic props, trainees will lear n the techniques needed to effectively weatherize our clients' homes.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
During this course, the tr ainees will be introduced to both HCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing op erations.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
All three H CR mandatory trainings are covered in this course:
Pl
ease reference the WAP Policies and Procedures manual for further details.
The above-listed trainings are mandatory for the positions stated. If a sub
grantee hires a new employee into one of these postions, or a current emplo
yee transfers into one of these positions, it is mandatory that they receiv
e this training within six (6) months of their start date. These mandatory
training sessions must be repeated every three (3) years by subgrantee pers
onnel who occupy these positions.
Agenda;
Day One
Monday - 11:00am - 4:30pm: Residential Health & Saf
ety Fundamentals
ÂÂÂÂ < /span>
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Se
aling Techniques, introduction to infrared cameras, introduction to basic r
esidential framing details with an emphasis on common air sealing areas and
building codes requirements for clearance to combustibles.
ÂÂÂÂ
Day Three
ÂÂÂÂ
Day Four
Thursday - 9:00am - 3:00pm: All day la
b session tool/equipment safety, lead safe jobsite setup, air sealing techn
iques, dense pack and loose fill cellulose installation techniques. Afterno
on lab session: fundamentals of blower door setup and operation, plus jobsi
te and lead safe cleanup skills, training skills review, question and answe
r session, awarding of Certificates of Completion
<
/span>
Dates;
Course covers the dates of October 6-9
Start Times
: Monday 11:00am the Tues.-Thurs. 9:00am
End Times: Mond ay - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂÂÂÂ ÂÂÂ
Other Notes:
Due to
the nature of the training, all attendees will be required to sign a waiver
of liability and a photo/video release form at the start of the training.<
/span>
P rerequisites: None
Class Size:
16
BPI CEU
: 16
Instructors:ÂAl McMahon, NYSWDA
<
/p>
Course Fees;Valued at $1,450*
$425/person - Weatherization Sub-grantees70% Savings< /span>
$475/person - affiliate members 67% Savings
$600/person - non-members and private contractors 58% Savings
ÂÂÂÂÂÂÂÂÂÂÂÂ
*Through the support of a grant from NYSERDA an d NYS HCR funding, we are able to continue to provide quality training at a n affordable price.
ÂÂÂÂÂÂÂ ÂÂÂÂ
NYSWDA will not be responsible for hotel costs, t
ravel to and from the training, breakfast and dinner meals, or incidentals.
Lunches are included for each day.
Click here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
CONTACT:This email address is being protected from spambots. You need JavaScript enabled to view it. document.getElementById('cloakfaa3deac088a7da1143204553a0fc01b').innerHTML = ''; var prefix = 'ma' + 'il' + 'to'; var path = 'hr' + 'ef' + '='; var addyfaa3deac088a7da1143204553a0fc01b = 'rvisser' + '@'; addyfaa3deac088a7da1143204553a0fc01b = addyfaa3deac088a7da1143204553a0fc01b + 'nyswda' + '.' + 'org'; var addy_textfaa3deac088a7da1143204553a0fc01b = 'rvisser' + '@' + 'nyswda' + '.' + 'org';document.getElementById('cloakfaa3deac088a7da1143204553a0fc01b').innerHTML += ''+addy_textfaa3deac088a7da1143204553a0fc01b+''; DTSTAMP:20260517T030907 DTSTART;TZID=America/New_York:20141006T090000 DTEND;TZID=America/New_York:20141009T170000 SEQUENCE:0 TRANSP:OPAQUE END:VEVENT END:VCALENDAR