Training Location: NYSWDA Training Center (Building 2) - 58 69 Fisher Road, East Syracuse, NY 13057
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Who Should Attend;
Entry level field staff and weatherization contractors - see detailed below.
ÂÂÂÂ
Course
This intensive 4-day training based at NY SWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealin g, dense pack and loose fill cellulose insulation installation. Using our s tate-of-the-art realistic wall, ceiling and attic props, trainees will lear n the techniques needed to effectively weatherize our clients' homes.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
During this course, the tr ainees will be introduced to both HCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing op erations.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
All three H CR mandatory trainings are covered in this course:
Pl
ease reference the WAP Policies and Procedures manual for further details.
The above-listed trainings are mandatory for the positions stated. If a sub
grantee hires a new employee into one of these postions, or a current emplo
yee transfers into one of these positions, it is mandatory that they receiv
e this training within six (6) months of their start date. These mandatory
training sessions must be repeated every three (3) years by subgrantee pers
onnel who occupy these positions.
Agenda;
Day One
Monday - 11:00am - 4:30pm: Residential Health & Saf
ety Fundamentals
ÂÂÂÂ < /span>
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Se
aling Techniques, introduction to infrared cameras, introduction to basic r
esidential framing details with an emphasis on common air sealing areas and
building codes requirements for clearance to combustibles.
ÂÂÂÂ
Day Three
ÂÂÂÂ
Day Four
Thursday - 9:00am - 3:00pm: All day la
b session tool/equipment safety, lead safe jobsite setup, air sealing techn
iques, dense pack and loose fill cellulose installation techniques. Afterno
on lab session: fundamentals of blower door setup and operation, plus jobsi
te and lead safe cleanup skills, training skills review, question and answe
r session, awarding of Certificates of Completion
<
/span>
Dates;
Course covers the dates of January 5-6, 2015
Start
Times: Monday 11:00am the Tues.-Thurs. 9:00am
End Times : Monday - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂ ÂÂÂÂÂÂÂÂÂ
Other Notes:
D
ue to the nature of the training, all attendees will be required to sign a
waiver of liability and a photo/video release form at the start of the trai
ning.
Prerequisites: None
Class Size: 16
BPI CEU:
16
Instructors:ÂAl McMahon, NYSWDA
Course Fees;Valued at $1,450*
$425/person - Weatherization Sub-grantees 70% Savings
$475/person - affiliate members 67% Savings
$600/pe rson - non-members and private contractors 58% Savings
ÂÂÂÂÂÂÂÂÂÂÂÂ
*Through the support of a grant from NYSE RDA and NYS HCR funding, we are able to continue to provide quality trainin g at an affordable price.
 ÂÂÂÂÂÂÂÂÂÂ
NYSWDA will not be responsible for hotel co
sts, travel to and from the training, breakfast and dinner meals, or incide
ntals. Lunches are included for each day.
Click here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
X-ALT-DESC;FMTTYPE=text/html:Training Location: NYSWDA Training Center (Building 2) - 58 69 Fisher Road, East Syracuse, NY 13057
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Who Should Attend;
Entry level field staff and weatherization contractors - see detailed below.
ÂÂÂÂ
Course
This intensive 4-day training based at NY SWDA's Energy Efficiency Training Center (Building 2) in East Syracuse, is a great introduction to building science principles and hands-on air sealin g, dense pack and loose fill cellulose insulation installation. Using our s tate-of-the-art realistic wall, ceiling and attic props, trainees will lear n the techniques needed to effectively weatherize our clients' homes.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
During this course, the tr ainees will be introduced to both HCR and BPI standards and regulations on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air sealing op erations.
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
All three H CR mandatory trainings are covered in this course:
Pl
ease reference the WAP Policies and Procedures manual for further details.
The above-listed trainings are mandatory for the positions stated. If a sub
grantee hires a new employee into one of these postions, or a current emplo
yee transfers into one of these positions, it is mandatory that they receiv
e this training within six (6) months of their start date. These mandatory
training sessions must be repeated every three (3) years by subgrantee pers
onnel who occupy these positions.
Agenda;
Day One
Monday - 11:00am - 4:30pm: Residential Health & Saf
ety Fundamentals
ÂÂÂÂ < /span>
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Se
aling Techniques, introduction to infrared cameras, introduction to basic r
esidential framing details with an emphasis on common air sealing areas and
building codes requirements for clearance to combustibles.
ÂÂÂÂ
Day Three
ÂÂÂÂ
Day Four
Thursday - 9:00am - 3:00pm: All day la
b session tool/equipment safety, lead safe jobsite setup, air sealing techn
iques, dense pack and loose fill cellulose installation techniques. Afterno
on lab session: fundamentals of blower door setup and operation, plus jobsi
te and lead safe cleanup skills, training skills review, question and answe
r session, awarding of Certificates of Completion
<
/span>
Dates;
Course covers the dates of January 5-6, 2015
Start
Times: Monday 11:00am the Tues.-Thurs. 9:00am
End Times : Monday - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
ÂÂÂÂÂ ÂÂÂÂÂÂÂÂÂ
Other Notes:
D
ue to the nature of the training, all attendees will be required to sign a
waiver of liability and a photo/video release form at the start of the trai
ning.
Prerequisites: None
Class Size: 16
BPI CEU:
16
Instructors:ÂAl McMahon, NYSWDA
Course Fees;Valued at $1,450*
$425/person - Weatherization Sub-grantees 70% Savings
$475/person - affiliate members 67% Savings
$600/pe rson - non-members and private contractors 58% Savings
ÂÂÂÂÂÂÂÂÂÂÂÂ
*Through the support of a grant from NYSE RDA and NYS HCR funding, we are able to continue to provide quality trainin g at an affordable price.
 ÂÂÂÂÂÂÂÂÂÂ
NYSWDA will not be responsible for hotel co
sts, travel to and from the training, breakfast and dinner meals, or incide
ntals. Lunches are included for each day.
Click here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
CONTACT:This email address is being protected from spambots. You need JavaScript enabled to view it. document.getElementById('cloak3b6fb39110a8aa96b523b4977e2edc14').innerHTML = ''; var prefix = 'ma' + 'il' + 'to'; var path = 'hr' + 'ef' + '='; var addy3b6fb39110a8aa96b523b4977e2edc14 = 'rvisser' + '@'; addy3b6fb39110a8aa96b523b4977e2edc14 = addy3b6fb39110a8aa96b523b4977e2edc14 + 'nyswda' + '.' + 'org'; var addy_text3b6fb39110a8aa96b523b4977e2edc14 = 'rvisser' + '@' + 'nyswda' + '.' + 'org';document.getElementById('cloak3b6fb39110a8aa96b523b4977e2edc14').innerHTML += ''+addy_text3b6fb39110a8aa96b523b4977e2edc14+''; DTSTAMP:20260516T204745 DTSTART;TZID=America/New_York:20150105T090000 DTEND;TZID=America/New_York:20150108T170000 SEQUENCE:0 TRANSP:OPAQUE END:VEVENT END:VCALENDAR