Training Location: NYSWDA Training Center (Building 2) - 5869 Fisher Road, East Syracuse, NY 13057
Who Should Attend;
Entry level field staff and weatherizati on contractors - see detailed below.
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) i n East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation insta llation. Using our state-of-the-art realistic wall, ceiling and attic props , trainees will learn the techniques needed to effectively weatherize our c lients' homes.
Â
During this course, the trainees will be introduced to both HCR and BPI standards and regulatio ns on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air seal ing operations.
Â
All three HCR manda tory trainings are covered in this course:
Please ref erence the WAP Policies and Procedures manual for further details. The abov e-listed trainings are mandatory for the positions stated. If a subgrantee hires a new employee into one of these postions, or a current employee tran sfers into one of these positions, it is mandatory that they receive this t raining within six (6) months of their start date. These mandatory training sessions must be repeated every three (3) years by subgrantee personnel wh o occupy these positions.
Agenda;
Day One< /span>
Monday - 11:00am - 4:30pm: R esidential Health & Safety Fundamentals
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Sealing Techniques, intr oduction to infrared cameras, introduction to basic residential framing det ails with an emphasis on common air sealing areas and building codes requir ements for clearance to combustibles.
Day Three
Wednesday - 9:00am - 4:30pm: Lead Safe Work Pra ctices
< span style="font-family: Tahoma, sans-serif;">
Day Four
Thur sday - 9:00am - 4:00pm: All day lab session tool/equipment safety, lead saf e jobsite setup, air sealing techniques, dense pack and loose fill cellulos e installation techniques. Afternoon lab session: fundamentals of blower do or setup and operation, plus jobsite and lead safe cleanup skills, training skills review, question and answer session, awarding of Certificates of Co mpletion
Dates;
Course covers the dates of March 13-16, 2017
Start Times: Monday 11:00am the Tues.-Thurs. 9:00am
End Times: Monday - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Other Notes:
Due to the nature of the training, all attendees will be required to
sign a waiver of liability and a photo/video release form at the start of
the training.
Prerequisites: None
< p>
BPI CEU: 16
Instructors:,
Joe Ilacqua, NYSWDA
Course Fees;
$507/person - NY Weatherization Sub-grantees
$725/person - affiliate members
$1,450/person - non-members
For information on becoming an affiliate me mber, please contact Drew Ehrlich in our Guilderland office (518) 690-0494 or at This email address i s being protected from spambots. You need JavaScript enabled to view it.
NYSWDA will not be responsibl e for hotel costs, travel to and from the training, breakfast and dinner me als, or incidentals. Lunches are included for each day.
< p>Click here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
X-ALT-DESC;FMTTYPE=text/html:Training Location: NYSWDA Training Center (Building 2) - 5869 Fisher Road, East Syracuse, NY 13057
Who Should Attend;
Entry level field staff and weatherizati on contractors - see detailed below.
This intensive 4-day training based at NYSWDA's Energy Efficiency Training Center (Building 2) i n East Syracuse, is a great introduction to building science principles and hands-on air sealing, dense pack and loose fill cellulose insulation insta llation. Using our state-of-the-art realistic wall, ceiling and attic props , trainees will learn the techniques needed to effectively weatherize our c lients' homes.
Â
During this course, the trainees will be introduced to both HCR and BPI standards and regulatio ns on Health & Safety, Lead Safe work practices and safe and proper use of tools and equipment. Trainees will also become proficient on the set up of blower doors and understand basic use of an infrared camera during air seal ing operations.
Â
All three HCR manda tory trainings are covered in this course:
Please ref erence the WAP Policies and Procedures manual for further details. The abov e-listed trainings are mandatory for the positions stated. If a subgrantee hires a new employee into one of these postions, or a current employee tran sfers into one of these positions, it is mandatory that they receive this t raining within six (6) months of their start date. These mandatory training sessions must be repeated every three (3) years by subgrantee personnel wh o occupy these positions.
Agenda;
Day One< /span>
Monday - 11:00am - 4:30pm: R esidential Health & Safety Fundamentals
Day Two
Tuesday - 9:00am - 4:30pm: Introduction to Building Science and Air Sealing Techniques, intr oduction to infrared cameras, introduction to basic residential framing det ails with an emphasis on common air sealing areas and building codes requir ements for clearance to combustibles.
Day Three
Wednesday - 9:00am - 4:30pm: Lead Safe Work Pra ctices
< span style="font-family: Tahoma, sans-serif;">
Day Four
Thur sday - 9:00am - 4:00pm: All day lab session tool/equipment safety, lead saf e jobsite setup, air sealing techniques, dense pack and loose fill cellulos e installation techniques. Afternoon lab session: fundamentals of blower do or setup and operation, plus jobsite and lead safe cleanup skills, training skills review, question and answer session, awarding of Certificates of Co mpletion
Dates;
Course covers the dates of March 13-16, 2017
Start Times: Monday 11:00am the Tues.-Thurs. 9:00am
End Times: Monday - Thursday 4:30pmÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
Other Notes:
Due to the nature of the training, all attendees will be required to
sign a waiver of liability and a photo/video release form at the start of
the training.
Prerequisites: None
< p>
BPI CEU: 16
Instructors:,
Joe Ilacqua, NYSWDA
Course Fees;
$507/person - NY Weatherization Sub-grantees
$725/person - affiliate members
$1,450/person - non-members
For information on becoming an affiliate me mber, please contact Drew Ehrlich in our Guilderland office (518) 690-0494 or at This email address i s being protected from spambots. You need JavaScript enabled to view it.
NYSWDA will not be responsibl e for hotel costs, travel to and from the training, breakfast and dinner me als, or incidentals. Lunches are included for each day.
< p>Click here to register
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
CONTACT:This email address is being protected from spambots. You need JavaScript enabled to view it. document.getElementById('cloak1bc69b9d12be01031dcf3e00e5625ea1').innerHTML = ''; var prefix = 'ma' + 'il' + 'to'; var path = 'hr' + 'ef' + '='; var addy1bc69b9d12be01031dcf3e00e5625ea1 = 'rvisser' + '@'; addy1bc69b9d12be01031dcf3e00e5625ea1 = addy1bc69b9d12be01031dcf3e00e5625ea1 + 'nyswda' + '.' + 'org'; var addy_text1bc69b9d12be01031dcf3e00e5625ea1 = 'rvisser' + '@' + 'nyswda' + '.' + 'org';document.getElementById('cloak1bc69b9d12be01031dcf3e00e5625ea1').innerHTML += ''+addy_text1bc69b9d12be01031dcf3e00e5625ea1+''; DTSTAMP:20260516T052300 DTSTART;TZID=America/New_York:20170313T090000 DTEND;TZID=America/New_York:20170316T170000 SEQUENCE:0 TRANSP:OPAQUE END:VEVENT END:VCALENDAR